|
|
|
|
|
|
|
|
|
|
Products
Line for producing armoring sectioned shapes 
Equipment for fixture and KNAUF profile fastener production Automatic line for longitudinal/transverse cutting of coiled steel
Line for square drainpipe system production 
Line for shaped gutter production 
Line for round drainpipe system production 
Line for half-round gutter production 
Automatic line for production of sectional shapes for assembly of plaster-cardboard plates 
Line for metal tiling production 
Line for producing formed-to- shape deck plating 
Automatic line for producing C-, U- and Z-profiles 
Line for the production of metal siding 
Line for producing metal fence 
Line for producing «Sandwich» type panels 
Universal line for producing ventilated profiles 
Universal line for producing screed strip (spackling angle) 
Line for round ridge cap production 
Combine line for finishing accessories production 
Roll forming machines for small business
Mobile line for UD gypsum board profile production
User Rating:
/ 0
|
|
The line is intended for profiling of UD profile from thin-sheet galvanized steel 0,4-0,5 mm of thickness. The excellence of final products is ensured with automatic control system and monitoring of master schedule exactitude. |
Set:
- Decoiler - 1 pc
- Roll forming machine - 1 pc
- Cutting off device – 1 pc
- Receiving stacking table – 2 pc
- Control cabinet – 1 pc
Parameter
| № | Parameter or size name | Parameter or size name |
| 1 | Treated material | Galvanized sheet steel from continuous lines in accordance with State Standart 14918 (Application: cold shape forming) |
| 2 | Thickness of treated material | 0,4-0,5 mm |
| 3 | Type of profile | UD |
| 4 | Breadth / width of the work part | 80 mm |
| 5 | Speed of profiling | 10 running meter/minute |
| 6 | Cutting accuracy | ± 10 mm |
| 7 | Type of roll forming machine | Mobile |
| 8 | Type of cutting off device |
Pneumatic |
| 9 | Type of decoiler | Stand, non-driving |
| 10 | Lifting capacity of decoiler | 1500 kg |
| 11 | Operation mode | Semiautomatic machine |
| 12 | Drive unit | Electromechanical, worm gear motor |
| 13 | Feeding | Chain |
| 14 | Maximum length of the sheets received by the receiving stacking table | 4000 mm |
| 15 | Control cabinet | Secures automatic work of the line after loading the material in the shape-forming mill; equipped with frequency converter |
| 16 | Maintenance personnel | 2 persons |
| 17 | Overall dimensions of the line | 11720х400х1400 mm |
| 18 | Fixed power (capacity) of the line | 1,5 kW |
| 19 | Weight of the line | 800 kg |
Scheme
Sketch
Foto
Video
